{"product_id":"ipega-pg-9083s-wireless-phone-joystick-game-controller-mobile-for-samsung-galaxy-s10-s10-s20-s20-5g-huawei-p40-pro-p30-p30-pro-mate-android-mobile-smartphone-tablet-android-6-0-higher-system","title":"ipega-PG-9083S Wireless Phone Joystick Game Controller Mobile for Samsung Galaxy S10\/S10+ \/S20 S20+5G\/Huawei P40 Pro P30 P30 Pro Mate Android Mobile Smartphone Tablet (Android 6.0 Higher System)","description":"\u003ch3\u003eipega-PG-9083S Wireless Phone Joystick Game Controller Mobile for Samsung Galaxy S10\/S10+ \/S20 S20+5G\/Huawei P40 Pro P30 P30 Pro Mate Android Mobile Smartphone Tablet (Android 6.0 Higher System)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eCustomers need to pay attention to the following issues:1.\nIpega PG-9083S is compatible with Android 6.0 and higher system mobile\nphones\/Android tablets, (please check your own device before purchasing)2.\nIpega PG-9083S does not support ios system devices, iPhone phones, and ipad\ntablets.3. MediaTek chip phones are not supported (please check your own\ndevice before buying)Note: According to different devices, choose different\nswitch button connection methods, the device has Android, Android standard\ndevice and game console connection, 1. [Android V3 direct play mode]: The\ncustomer receives the game controller, and turns on the switch mode on the\nleft hand side of the controller before turning it on.1. Please select the\nAndroid mode (the leftmost Android logo): long press the HOME button for 3\nseconds to turn on, and then the LED1 indicator light flashes quickly;2. Turn\non the wireless BT function of the andriod device, click 9083S: select the\npairing connection, after the connection is successful,3. Search shootingplus\nv3 in the mobile APP download, download and install.Open shootingplus V3, open\nthe V3 floating window, if your interface does not see the floating window,\nyou need to open the settings-permission management on the phone's settings\npage, and open the floating window function.2.[Andriod standard mode]:set the\nmode switch to the Rightmost position,Press and hold \"HOME\"button for 3\nseconds to turn on the gamepad ,At this time ,the LED3 indicator flashes\nquickly,then scarch \"PG-9083\"on mobile bluethooth and pair it ,LED3 indicator\nwill be always on after connected successfuly! if youconnected before ,press\nthe HOME button directly,LED indicator will flash slowly,automatically\nreconnect3. Note: Before powering on, you must set the corresponding switch\nmode according to your own device. If there is no pairing mode, there will be\nproblems of inoperability and incompatibility. 1. Support the handle of the\nShootingPlus V3 protocol, the game displayed in the software After the\ndownload button is connected, the download button preset can be played\ndirectly. If you want to play other games, you can customize your button\nthrough the ShootingPlus V3 software. .2. First, connect the handle to the\nmobile phone through the Bluetooth, PG-9083S, then open the shangingplus v3\nsoftware, confirm that the handle is connected to the background, directly\ninto the game interface, click \"V3\" suspended ball icon (or handle Press the\nSTART button) Enter the custom button interface, as shown. 1.After entering\nthe custom button interface, you can drag the button icon at will. Drag to the\nvirtual button you want to correspond to, if you think that the button icon is\ntoo much, you can drag the unwanted button icon to the [Dust Bucket] button,\nyou can delete the button. icon.2.After entering, press and hold a blank area\non the screen to start loading screenshots of the game, and click \"Select\nPicture\" to select screenshots of the game. Please take a screenshot of the\npicture of the main interface of the game in advance, such as \"Peace Elite\"\nHIGH PRECIS ION ROCKER,SMOOTH OPERAT IONMatch textured caps to prevent\nslpplingThe virtual joystick should be aligned with the set key shake, and\nthere should be no deviation.Product model: 9083Swireless 4.0, transmission\ndistance ≤ 8 metersBattery capacity: 380mAHContinuous use time: 15\nhoursProduct weight: 232±5g 1. If you want to completely reset, you can click\nthe [New] button. At this point, the button icon is all cleared, then press\nthe button on the handle, press A, the A button icon will appear in the middle\nof the screen, drag to you want to drag it. On the virtual button, other\nbuttons are set up.2. After the setting is complete, you can exit the custom\nbutton interface, click the [Save] button (or press the START button) to exit.\nDownload shootingplus V3 APP, customize button settings according to different\ngame requirements,1. In the game settings interface, select joystick\nsettings,2. The virtual joystick should be aligned with the setting button\nrocker, and there should be no deviation.3. It is recommended to enlarge the\nradius of the virtual joystick in the setting interface. If the radius is too\nsmall, the joystick will not match the virtual joystick and will not work\nnormally.4. You can view YouTube videos in the settings, please contact me if\nyou have any questions, thank you Note: Common customer problems:Q: The\ngamepad does not work,Answer: 1.ipega-9083S supports Android 6.0 and higher\ndevices, and does not support ios devices. If the device is lower than this\nversion, it will not work. 2. You need to download shootingplus V3 for custom\nbutton settings,Q: The product's wireless network is often disconnected or\nstuck.Answer: 1. Insufficient power of the gamepad will cause frequent\ndisconnection of the wireless network, 2. Android phones and devices freeze,\ndisconnect, and the phone displays insufficient Android memory.Q: The analog\njoystick on the right side of the gamepad does not work properly.Answer: 1.The\nfunction of the button on the right is not turned on. The customer needs to\nopen ShootingplusV3, set the button interface, click R, select the view mode\nand save. 2. Select the joystick mode in the game settings,Q: Android devices\nare not working properly,Answer: Please make sure that the Android device is\n6.0 or higher, and make sure that the Android button mode is selected for the\ngamepad.Q: The ios device cannot work normally,Answer: 9083S does not support\nApple ios system devices, and does not supportQ: The dead zone appears on the\njoystick controllerAnswer: It is recommended to adjust the size of the virtual\njoystick and enlarge the virtual joystick,Q: I can connect, but the game\nbuttons do not respond Answer: After entering the game, you need to select and\nset the joystick in the game settings. Each game is different. Set according\nto the operation of the game.\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n  \u003cul class=\"a\"\u003e\n         \u003cli\u003e2. Startup method: Note: Customers need to select the pairing startup method according to the device. There is a mode button on the left side of the handle. There are two startup modes: Android V3 direct mode and Android standard game mode. After selecting the mode correctly, press and hold the HOME button to start, the LED indicator flashes quickly, turn on the phone and pair. After the connection is successful, the LED indicator will always be on.\u003c\/li\u003e\n         \u003cli\u003e3. Download shootingplus V3 APP: To use the gamepad for the first time, the customer needs to customize the button settings according to your game, scan the QR code on the manual, or follow shootingplus V3 to download the Shootingplus V3 APP to customize the buttons and customizations according to their own habits Set up.\u003c\/li\u003e\n         \u003cli\u003e4. Note: When setting the buttons, you should set the buttons according to the changes of the game, and adjust the size of the virtual joystick appropriately during the setting to avoid too many blind spots. When setting the buttons, please align them with the virtual buttons to avoid inoperability. Customers can search for related video tutorials PG-9083S-shootingplus-V3 settings on YouTube. If you have any questions, please contact us in time, please send us an email,\u003c\/li\u003e\n         \u003cli\u003e5. PG-9083S adopts wireless 4.0 wireless solution, which is compatible with most games on the market. The structure of PG-9083S accords with ergonomics. The continuous hitting function of the turbine makes the game more exciting, comfortable to operate and accurate positioning. Stretching 280mm\/ 11 inches. Built-in 380mAH high-performance lithium battery, which can be used continuously for more than 15 hours and fully charged for up to 30 days.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n","brand":"ipega","offers":[{"title":"Default Title","offer_id":52221443473568,"sku":"B07BFVNTJR","price":258.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0418\/7134\/3776\/files\/B07BFVNTJR.jpg?v=1737955458","url":"https:\/\/dingoship.com.au\/products\/ipega-pg-9083s-wireless-phone-joystick-game-controller-mobile-for-samsung-galaxy-s10-s10-s20-s20-5g-huawei-p40-pro-p30-p30-pro-mate-android-mobile-smartphone-tablet-android-6-0-higher-system","provider":"DingoShip AU","version":"1.0","type":"link"}