Enter 5DINGO at Checkout for 5% OFF & Free Shipping Australia Wide

{"id":6855551025312,"title":"JVCC AF-GC-5 Aluminum Foil\/Glass Cloth Tape: 3\/4 in. x 36 yds. (Silver)","handle":"jvcc-af-gc-5-aluminum-foil-glass-cloth-tape-3-4-in-x-36-yds-silver","description":"\u003ch3\u003eJVCC AF-GC-5 Aluminum Foil\/Glass Cloth Tape: 3\/4 in. x 36 yds. (Silver)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eJVCC AF-GC-5 Aluminum Foil \/ Glass Cloth Tape is a thin tape that combines\nglass cloth with a laminate of aluminum foil. It provides high strength and\nreflectivity with excellent flexibility. The fiberglass cloth side is coated\nwith a transparent, high-temperature resistant silicone adhesive. This product\nwill withstand moderate grit blasting, is non-corrosive, and flame retardant\n(will not burn under open flame \/ extreme temperature exposure). This aluminum\nfoil fiberglass cloth tape can be used as a masking tape in plasma spray\napplications, seaming and repair of heat and flame barrier curtains, securing\nthermal insulation on heating and ventilation ducts, protecting and shielding\nvarious missile and aircraft components such as control cables, harnesses, and\nfuel lines. It prevents the build-up of liquid metal on surfaces that must be\nprotected. NOTES: Sizes shipped will typically be the tape industry standard\nmetric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered\n(rolls are approximately 5% narrower than the nominal size). This product's\nactual size is 19.0mm wide. As with any adhesive tape product it is always the\nuser's responsibility to determine that the product is suitable for their\nintended use; e.g. if you want to remove a product cleanly from a specific\ntype of substrate please test on an inconspicuous area first.Technical\nInformation- Core: 3 inch diameter - Backing\/Carrier: fiberglass cloth with\naluminum foil laminate - Adhesive: silicone - Standards Met: T-MIL 83284, ASTM\nD1000, ASTM 149, JIS Z0237 - Thickness: 8.7 mils (carrier, adhesive) -\nAdhesion: 43 ounces per inch (to stainless steel test panel) - Tensile\nStrength: 72 pounds per inch (longitudinal) - Service\/Operating Temperature:\n-94F to 500F - Elongation: 11 %\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eJVCC AF-GC-5 Aluminum Foil \/ Glass Cloth Tape is a thin tape that combines glass cloth with a laminate of aluminum foil. It provides high strength and reflectivity with excellent flexibility. The fiberglass cloth side is coated with a transparent, high-temperature resistant silicone adhesive.\u003c\/li\u003e\n \u003cli\u003eThis product will withstand moderate grit blasting, is non-corrosive, and flame retardant (will not burn under open flame \/ extreme temperature exposure).\u003c\/li\u003e\n \u003cli\u003eThis aluminum foil fiberglass cloth tape can be used as a masking tape in plasma spray applications, seaming and repair of heat and flame barrier curtains, securing thermal insulation on heating and ventilation ducts, protecting and shielding various missile and aircraft components such as control cables, harnesses, and fuel lines. It prevents the build-up of liquid metal on surfaces that must be protected.\u003c\/li\u003e\n \u003cli\u003eStandards Met: T-MIL 83284, ASTM D1000, ASTM 149, JIS Z0237. Carrier\/Backing: fiberglass cloth with aluminum foil laminate. Adhesive: silicone.\u003c\/li\u003e\n \u003cli\u003eThickness: 8.7 mils (carrier, adhesive). Adhesion: 43 ounces per inch (to stainless steel test panel). Tensile Strength: 72 pounds per inch (longitudinal). Service\/Operating Temperature: -94F to 500F. Elongation: 11%. Core: 3-inch diameter.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n","published_at":"2021-07-30T19:26:03+10:00","created_at":"2021-07-30T19:26:03+10:00","vendor":"J.V. Converting","type":"Duct Tape","tags":["ship02"],"price":20000,"price_min":20000,"price_max":20000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40526862876832,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"B01A7IA07C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"JVCC AF-GC-5 Aluminum Foil\/Glass Cloth Tape: 3\/4 in. x 36 yds. (Silver)","public_title":null,"options":["Default Title"],"price":20000,"weight":227,"compare_at_price":null,"inventory_management":null,"barcode":"0682821231681","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/dingoship.com.au\/cdn\/shop\/products\/B01A7IA07C.jpg?v=1650000668","\/\/dingoship.com.au\/cdn\/shop\/products\/61lNfsgJ1aL.jpg?v=1629279748"],"featured_image":"\/\/dingoship.com.au\/cdn\/shop\/products\/B01A7IA07C.jpg?v=1650000668","options":["Title"],"media":[{"alt":null,"id":24479028019360,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1455,"width":1455,"src":"\/\/dingoship.com.au\/cdn\/shop\/products\/B01A7IA07C.jpg?v=1650000668"},"aspect_ratio":1.0,"height":1455,"media_type":"image","src":"\/\/dingoship.com.au\/cdn\/shop\/products\/B01A7IA07C.jpg?v=1650000668","width":1455},{"alt":null,"id":21986435858592,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1059,"width":1059,"src":"\/\/dingoship.com.au\/cdn\/shop\/products\/61lNfsgJ1aL.jpg?v=1629279748"},"aspect_ratio":1.0,"height":1059,"media_type":"image","src":"\/\/dingoship.com.au\/cdn\/shop\/products\/61lNfsgJ1aL.jpg?v=1629279748","width":1059}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003eJVCC AF-GC-5 Aluminum Foil\/Glass Cloth Tape: 3\/4 in. x 36 yds. (Silver)\u003c\/h3\u003e\n\u003cp id=\"b\"\u003eJVCC AF-GC-5 Aluminum Foil \/ Glass Cloth Tape is a thin tape that combines\nglass cloth with a laminate of aluminum foil. It provides high strength and\nreflectivity with excellent flexibility. The fiberglass cloth side is coated\nwith a transparent, high-temperature resistant silicone adhesive. This product\nwill withstand moderate grit blasting, is non-corrosive, and flame retardant\n(will not burn under open flame \/ extreme temperature exposure). This aluminum\nfoil fiberglass cloth tape can be used as a masking tape in plasma spray\napplications, seaming and repair of heat and flame barrier curtains, securing\nthermal insulation on heating and ventilation ducts, protecting and shielding\nvarious missile and aircraft components such as control cables, harnesses, and\nfuel lines. It prevents the build-up of liquid metal on surfaces that must be\nprotected. NOTES: Sizes shipped will typically be the tape industry standard\nmetric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered\n(rolls are approximately 5% narrower than the nominal size). This product's\nactual size is 19.0mm wide. As with any adhesive tape product it is always the\nuser's responsibility to determine that the product is suitable for their\nintended use; e.g. if you want to remove a product cleanly from a specific\ntype of substrate please test on an inconspicuous area first.Technical\nInformation- Core: 3 inch diameter - Backing\/Carrier: fiberglass cloth with\naluminum foil laminate - Adhesive: silicone - Standards Met: T-MIL 83284, ASTM\nD1000, ASTM 149, JIS Z0237 - Thickness: 8.7 mils (carrier, adhesive) -\nAdhesion: 43 ounces per inch (to stainless steel test panel) - Tensile\nStrength: 72 pounds per inch (longitudinal) - Service\/Operating Temperature:\n-94F to 500F - Elongation: 11 %\u003c\/p\u003e \n\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n \u003cul class=\"a\"\u003e\n \u003cli\u003eJVCC AF-GC-5 Aluminum Foil \/ Glass Cloth Tape is a thin tape that combines glass cloth with a laminate of aluminum foil. It provides high strength and reflectivity with excellent flexibility. The fiberglass cloth side is coated with a transparent, high-temperature resistant silicone adhesive.\u003c\/li\u003e\n \u003cli\u003eThis product will withstand moderate grit blasting, is non-corrosive, and flame retardant (will not burn under open flame \/ extreme temperature exposure).\u003c\/li\u003e\n \u003cli\u003eThis aluminum foil fiberglass cloth tape can be used as a masking tape in plasma spray applications, seaming and repair of heat and flame barrier curtains, securing thermal insulation on heating and ventilation ducts, protecting and shielding various missile and aircraft components such as control cables, harnesses, and fuel lines. It prevents the build-up of liquid metal on surfaces that must be protected.\u003c\/li\u003e\n \u003cli\u003eStandards Met: T-MIL 83284, ASTM D1000, ASTM 149, JIS Z0237. Carrier\/Backing: fiberglass cloth with aluminum foil laminate. Adhesive: silicone.\u003c\/li\u003e\n \u003cli\u003eThickness: 8.7 mils (carrier, adhesive). Adhesion: 43 ounces per inch (to stainless steel test panel). Tensile Strength: 72 pounds per inch (longitudinal). Service\/Operating Temperature: -94F to 500F. Elongation: 11%. Core: 3-inch diameter.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n\n"}

JVCC AF-GC-5 Aluminum Foil/Glass Cloth Tape: 3/4 in. x 36 yds. (Silver)

In Stock. Leaves warehouse within 2 - 3 business days

200.00 AUD
Maximum quantity available reached.
Free Shipping Australia Wide
100% Safe & Secure Checkout
100 Days Return Policy *
1 Year Warranty *

JVCC AF-GC-5 Aluminum Foil/Glass Cloth Tape: 3/4 in. x 36 yds. (Silver)

JVCC AF-GC-5 Aluminum Foil / Glass Cloth Tape is a thin tape that combines glass cloth with a laminate of aluminum foil. It provides high strength and reflectivity with excellent flexibility. The fiberglass cloth side is coated with a transparent, high-temperature resistant silicone adhesive. This product will withstand moderate grit blasting, is non-corrosive, and flame retardant (will not burn under open flame / extreme temperature exposure). This aluminum foil fiberglass cloth tape can be used as a masking tape in plasma spray applications, seaming and repair of heat and flame barrier curtains, securing thermal insulation on heating and ventilation ducts, protecting and shielding various missile and aircraft components such as control cables, harnesses, and fuel lines. It prevents the build-up of liquid metal on surfaces that must be protected. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 19.0mm wide. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information- Core: 3 inch diameter - Backing/Carrier: fiberglass cloth with aluminum foil laminate - Adhesive: silicone - Standards Met: T-MIL 83284, ASTM D1000, ASTM 149, JIS Z0237 - Thickness: 8.7 mils (carrier, adhesive) - Adhesion: 43 ounces per inch (to stainless steel test panel) - Tensile Strength: 72 pounds per inch (longitudinal) - Service/Operating Temperature: -94F to 500F - Elongation: 11 %

Product Features

  • JVCC AF-GC-5 Aluminum Foil / Glass Cloth Tape is a thin tape that combines glass cloth with a laminate of aluminum foil. It provides high strength and reflectivity with excellent flexibility. The fiberglass cloth side is coated with a transparent, high-temperature resistant silicone adhesive.
  • This product will withstand moderate grit blasting, is non-corrosive, and flame retardant (will not burn under open flame / extreme temperature exposure).
  • This aluminum foil fiberglass cloth tape can be used as a masking tape in plasma spray applications, seaming and repair of heat and flame barrier curtains, securing thermal insulation on heating and ventilation ducts, protecting and shielding various missile and aircraft components such as control cables, harnesses, and fuel lines. It prevents the build-up of liquid metal on surfaces that must be protected.
  • Standards Met: T-MIL 83284, ASTM D1000, ASTM 149, JIS Z0237. Carrier/Backing: fiberglass cloth with aluminum foil laminate. Adhesive: silicone.
  • Thickness: 8.7 mils (carrier, adhesive). Adhesion: 43 ounces per inch (to stainless steel test panel). Tensile Strength: 72 pounds per inch (longitudinal). Service/Operating Temperature: -94F to 500F. Elongation: 11%. Core: 3-inch diameter.

Related Products