Yosoo Load Cell, HX711 Weighing Sensor, 50Kg Weighing Sensor, HX711 Module Amplifier, HX711 Module 4 Piece Personal 50kg Half Bridge Strain Gauge Weighing Sensor Set
Yosoo Load Cell, HX711 Weighing Sensor, 50Kg Weighing Sensor, HX711 Module Amplifier, HX711 Module 4 Piece Personal 50kg Half Bridge Strain Gauge Weighing Sensor Set
Specification: Sensor size: 34 x 34 mm /1.34 x 1.34 inch Sensor Internal Construction: 1000 Ohm Half Bridge Strain Gauge Measuring Range: 50kg/100kg/200kg Package List: 4 Weighing Sensor 1 HX711 Module User Manual: When measuring, external force is applied correctly to the outside. The strain beam part of the E-shaped sensor (that is, the beam arm with the white rubber in the middle of the strain gauge) and the outside are intended to form a shear force in the opposite direction, that is, the middle of the strain beam must be able to undergo bending changes under load, and on the other There must be no obstruction on the side of the expansion beam. Inside the sensor there is a set of half-bridge strain gauges that can be used in the following three ways: 1. Use a sensor with external resistance to form a full-bridge measurement. The range corresponds to the range of a sensor: 50 kg. Requires higher external resistance requirements. 2. Use two sensors to form a full bridge measurement. The range is the sum of the ranges of the two sensors: 50kgx2=100kg. 3. When four sensors are used to form a full bridge measurement, the range is the sum of the ranges of four sensors: 50kg x 4 = 200kg Note: Please note that the new type and old type of this product are according to the Will be sent at random, and make sure you don't mind before ordering.
Product Features
- [HX711 Module]: This Module uses a high-precision 24-bit A/D converter chip HX711, designed for high-precision electronic scales
- [Good performance]: Two analog channel inputs with built-in programmable amplifier with 128x gain
- [Working principle]: The input circuit can be configured as a bridge sensor, providing bridge pressure sensor modes, making it an ideal, high-precision, low-cost sampling front-end module
- [Product advantages]: The Weight sensor is accurate and sensitive at small volume; The sensor is a set of half-bridge strain gauges with three usage modes
- [Specification]: Sensor size: 34 x 34 mm/1.34 x 1.34 inch; Internal sensor construction: 1000 ohm half-bridge strain gauge; Measuring range: 50kg/100kg/200kg