5pcs MCU230 Bus Transceiver SN65HVD230 CAN Communication Module
5pcs MCU230 Bus Transceiver SN65HVD230 CAN Communication Module
【Mode & Control】The SN65HVD230 has three different operating modes: high speed, slope and wait. Its working mode control can be realized by Rs control pin. The output pin Tx of the CAN controller is connected to the data input terminal D of the SN65HVD230, and the data sent by this CAN node can be transmitted to the CAN network. The receiving pin Rx of the CAN controller is connected to the data output end R of the SN65HVD230 for receiving data. The SN65HVD230 mode option port Rs is connected by a jumper and a slope resistor grounded at one end, and the choice of three operating modes can be realized by hardware mode, where the slope resistor is a potentiometer from 0 to 100kΩ.Package included: 5pcs MCU230 Bus Transceiver SN65HVD230 CAN Communication Module.
Product Features
- Description MCU230 Bus Transceiver SN65HVD230 CAN Communication Module.
- FeatureSN65HVD230 can be used in high interference environments. The device has good transceiver ability at different rates, fully compatible with ISO11898 standard, slope control, reduce radio frequency interference (RFI); Differential receiver with resistance to a wide range of common mode interference and electromagnetic interference (EMI).
- SpecificationHigh input impedance, allowing 120 nodes; Low current waiting mode, typical current is 370A; Signal transmission rate up to 1Mb/s.
- SafetyWith thermal protection, open circuit failure protection function; It has the function of resisting instantaneous interference and protecting bus.