8 Channel Optocoupler Isolation Module PLC Signal Converter Board Opto Isolator Module 3.6-30V
8 Channel Optocoupler Isolation Module PLC Signal Converter Board Opto-Isolator Module 3.6-30V
Specification: Item Type: Optocoupler Isolation Board Material: PCB Drive Signal Voltage: 3.6-30V 24V output voltage range: 3.6-30V (output current depends on the specific situation, but the maximum power does not exceed 10mA, the total power is constant, voltage and current are inversely proportional) Package List: 1 x Optocoupler Isolation Board Note: If If it is a pulse signal, please note that the limit of 817 is below 4 kHz. Please do not use this module for control signals higher than 4 kHz, as this will not work properly.
Product Features
- EXCELLENT PCB: High quality PCB Materials possess reliability and miniaturization, good maintenance and interchangeability
- DRIVE VARIOUS OCCASIONS: The optical isolation has a strong interference-resistant ability, which can drive high-power transistors, MOS tubes and other occasions that require high-voltage driving, and can also directly drive 24V low power relay to work
- TURN ON CONTROLLED TERMINAL: Can provide 3.3V or 5V control interface with voltage level of 3.6-24V realize. After the control terminal is turned on, the controlled terminal is also turned on
- SIMULTANEOUS CONTROL OF DIFFERENT VOLTAGE: The 4 channels of the 817 on the board are independent, which can realize the simultaneous control of different voltages, etc.
- HIGH LEVEL OR PULL-DOWN OUTPUT: Whether the output port is a high level output or a pull-down output can be realized by the jumper cap